Knowledgebase
Powersave > My Help Desk > Knowledgebase

Ask a question:


Can I mount the transmitter to the outside of my panel?

Solution The transmitter is designed to be mounted inside the panel or in a weather proof enclosure. It the main panel is located inside the home, then the transmitter can be mounted on the outside of that panel and the ct clamps can be fed through one of the panel knockouts.  If the panel to be measured is outside, then the transmitter should be placed inside the circuit panel. If there is not enough room for the transmitter, a separate weather proof enclosure should be used.
 
Was this article helpful? yes / no
Article details
Article ID: 71
Category: Envi and EnviR information
Date added: 2011-08-18 11:56:02
Views: 473
Rating (Votes): Article rated 5.0/5.0 (2)

 
<< Go back

Powered by Help Desk Software HESK™